G2-1A07 Crydom - Relays

G2-1A07 Description

The G2-1A07 is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

Request a quote for the G2-1A07 and our team will get back to you with price, quantity available and lead time. We ship worldwide. As with any power device, please check the manufacturer's datasheet to confirm it matches your design.

Summary of Features

Target Applications

Crydom G2-1A07 is used for low-level signal and small load switching on circuit boards in telecom, test and measurement, security systems, metering and industrial control electronics.

Key Specifications

Crydom G2-1A07 is a 1 Form A MOSFET output PCB solid state relay (G2 Series), 150 V peak switching voltage. Source: Crydom G2 Series 1 Form A datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Switching voltage (max)	150 Vpk
Switching current, AC mode / DC mode (max)	450 mA / 900 mA
On resistance, AC mode / DC mode (max)	5 / 1.25 Ohm
Off-state leakage (max, VL = max)	1 mA
Turn-on / turn-off time (max)	5.0 ms (IF = 10 mA) / 1.0 ms
Input (LED)
LED forward current to turn on (max)	5.0 mA
Recommended forward current	10-30 mA
LED forward voltage (IF = 20 mA)	1.1-1.4 V
General
Dielectric strength, input to output (60 s)	3750 Vrms
Power dissipation (max)	600 mW

Technical document (PDF)  |  Request a quote for G2-1A07 (reply within 24 hours)