F1891RD1200 Crydom - Power Transistor Module

F1891RD1200 Description

Rated at 1200 V and 90 A, the Crydom F1891RD1200 is an SCR/diode power module. It is used as a building block for AC switches, soft starters, controlled rectifiers and heater controls.

Need the F1891RD1200? USComponent stocks and sources power modules for repair shops, OEMs and maintenance teams worldwide. Request a quote and we'll confirm availability and lead time. Always compare against the datasheet before ordering.

Summary of Features

Target Applications

Crydom F1891RD1200 is used for AC/DC power conversion and control: controlled rectifiers, DC motor drives, heater and power control, battery chargers and power supplies.

Key Specifications

Crydom F1891RD1200 is an F18 Series SCR/diode power module, 90 A average output current, circuit RD (diode doubler), 1200 V reverse blocking, isolation barriers without auxiliary cathodes. Source: Crydom F18 Series Power Modules brochure (Performance Characteristics). Values at 25°C unless noted.

Parameter	Value
Average output current per device (Tc = 85°C)	90 A
Reverse blocking voltage (VRRM)	1200 V
Circuit configuration	RD: diode doubler
One-cycle surge current, peak (non-repetitive)	1950 A
I²t for fusing (8.3 ms)	15800 A²s
Rate of rise of on-state current	100 A/µs
Rate of rise of off-state voltage (Tc = 125°C)	500 V/µs
Leakage current (max, Tj = 125°C, rated voltage)	20 mA
Gate current to fire (max, VD = 6 V)	150 mA
Gate voltage to fire (max, VD = 6 V)	3 V
Latching / holding current (max)	500 mA / 300 mA
Thermal resistance junction to case, per module	0.15 °C/W
Thermal resistance case to sink (with grease)	0.1 °C/W
Isolation voltage (min, terminal to base)	2500 Vrms
Junction operating and storage temperature	-40 to 125°C
Mounting torque	Mounting screws 20 in-lb; terminal studs 30 in-lb

Technical document (PDF)  |  Request a quote for F1891RD1200 (reply within 24 hours)