F1857SD1000 Crydom - Power Transistor Module

F1857SD1000 Description

F1857SD1000 is a 1000 V, 55 A SCR/diode power module made by Crydom. It is used as a building block for AC switches, soft starters, controlled rectifiers and heater controls.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the F1857SD1000, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom F1857SD1000 is used for AC/DC power conversion and control: controlled rectifiers, DC motor drives, heater and power control, battery chargers and power supplies.

Key Specifications

Crydom F1857SD1000 is an F18 Series power module (SCR/diode power control building block), circuit type SD, 55 A DC output current, for 380 VAC lines. Source: Crydom F18 Series datasheet. Values at 25°C unless noted.

Parameter	Value
Maximum DC output current (Tc = 85°C)	55 A
Operating voltage code	1000 (380 VAC line)
Circuit type	SD (see datasheet circuit diagram)
Maximum voltage drop (VF)	1.4 V @ 165 A
Maximum non-repetitive surge current (1/2 cycle, 60 Hz)	1500 A
Maximum I²t for fusing (8.3 ms)	9350 A²s
Critical rate of rise of on-state current (Tj = 125°C)	100 A/µs
Critical rate of rise of off-state voltage	1000 V/µs
Gate trigger current / voltage (25°C)	150 mA / 3.0 V
Average gate power	0.5 W
Maximum peak reverse gate voltage	5.0 V
Maximum thermal resistance, junction to ceramic base per chip	0.25 °C/W
Operating junction temperature	-40 to 125°C
Isolation voltage	2500 Vrms
Weight (typical)	4.75 oz (135 g)
Torque	Terminal stud screw 30 in-lb; mounting screws 20 in-lb

Technical document (PDF)  |  Request a quote for F1857SD1000 (reply within 24 hours)