F1827CCD1600 Crydom - Power Transistor Module

F1827CCD1600 Description

The Crydom F1827CCD1600 is an SCR/diode power module, rated for 1600 V and 25 A. It is used as a building block for AC switches, soft starters, controlled rectifiers and heater controls.

Looking for a replacement F1827CCD1600? USComponent can quote new and hard-to-find stock and ships worldwide. Request a quote for pricing and lead time, and double-check the datasheet to make sure it fits your application.

Summary of Features

Target Applications

Crydom F1827CCD1600 is used for AC/DC power conversion and control: controlled rectifiers, DC motor drives, heater and power control, battery chargers and power supplies.

Key Specifications

Crydom F1827CCD1600 is an F18 Series power module (SCR/diode power control building block), circuit type CCD, 25 A DC output current, for 600 VAC lines. Source: Crydom F18 Series datasheet. Values at 25°C unless noted.

Parameter	Value
Maximum DC output current (Tc = 85°C)	25 A
Operating voltage code	1600 (600 VAC line)
Repetitive peak reverse voltage (VRRM)	1600 Vpk
Circuit type	CCD (see datasheet circuit diagram)
Maximum voltage drop (VF)	1.55 V @ 75 A
Maximum non-repetitive surge current (1/2 cycle, 60 Hz)	400 A
Maximum I²t for fusing (8.3 ms)	670 A²s
Critical rate of rise of on-state current (Tj = 125°C)	100 A/µs
Critical rate of rise of off-state voltage	1000 V/µs
Gate trigger current / voltage (25°C)	150 mA / 3.0 V
Average gate power	0.5 W
Maximum peak reverse gate voltage	5.0 V
Maximum thermal resistance, junction to ceramic base per chip	0.4 °C/W
Operating junction temperature	-40 to 125°C
Isolation voltage	2500 Vrms
Weight (typical)	4.75 oz (135 g)
Torque	Terminal stud screw 30 in-lb; mounting screws 20 in-lb

Technical document (PDF)  |  Request a quote for F1827CCD1600 (reply within 24 hours)