EFF15C Crydom - Power Transistor Module
EFF15C Description
Crydom makes the EFF15C, an SCR/diode power module. It is used as a building block for AC switches, soft starters, controlled rectifiers and heater controls.
Need the EFF15C? USComponent stocks and sources power modules for repair shops, OEMs and maintenance teams worldwide. Request a quote and we'll confirm availability and lead time. Always compare against the datasheet before ordering.
Summary of Features
Crydom EFF15C is an EF Series SCR/diode power module, current code F, circuit 15, 240 VAC line. The datasheet marks this series obsolete.
Target Applications
Crydom EFF15C is used for AC/DC power conversion and control: controlled rectifiers, DC motor drives, heater and power control, battery chargers and power supplies.
Key Specifications
Crydom EFF15C is an EF Series SCR/diode power module, current code F, circuit 15, 240 VAC line. The datasheet marks this series obsolete. Source: Crydom EF Series datasheet (2009). Values at 25°C unless noted.
| Parameter | Value |
|---|---|
| Load current rating, single phase / three phase / AC switch | 100 / 135 / 110 A |
| AC line voltage | 240 VAC |
| Circuit type | 15 (see datasheet circuit diagram) |
| Maximum DC output current (Tc = 85°C, single phase) | 100 A |
| Maximum voltage drop (VF) | 1.4 V @ 100 A |
| Maximum non-repetitive surge current (1/2 cycle, 60 Hz) | 1500 A |
| Maximum I²t for fusing (8.3 ms) | 9340 A²s |
| Gate trigger current / voltage (25°C) | 150 mA / 3.0 V |
| Critical rate of rise of on-state current (Tj = 125°C) | 100 A/µs |
| Critical rate of rise of off-state voltage | 500 V/µs |
| Maximum thermal resistance, junction to ceramic base per chip | 0.36 °C/W |
| Operating junction temperature | -40 to 125°C |
| Isolation voltage | 2500 Vrms |
| Weight (typical) | 7.0 oz (198 g) |
Technical document (PDF) | Request a quote for EFF15C (reply within 24 hours)

