ED10C5 Crydom - Relays

ED10C5 Description

The ED10C5 from Crydom is a solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the ED10C5 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom ED10C5 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom ED10C5 is a 5 A DC output plug-in solid state relay (ED Series, industry-standard EMR plug-in package), 1-80 VDC load, control 18-32 VDC, LED input indicator. Source: Crydom ED Series DC output datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	1-80 VDC
Maximum load current, UL 508 resistive / IEC 60947-4-1 DC-1, DC-3	5 A
Maximum load current, UL 508 motor controller	2.0 FLA
Minimum load current	2.5 mA
Maximum off-state leakage @ rated voltage	20 µA
Maximum on-state voltage drop @ rated current and 40°C	0.3 Vdc
Maximum surge current (10 ms)	60 Adc
Maximum PWM	500 Hz
Input
Control voltage range	18-32 VDC
Minimum turn-on / turn-off voltage	18 / 2 VDC
Input current (min-max)	10.7-19.7 mA
Nominal input impedance	1.6 kOhm
Maximum turn-on / turn-off time	0.6 ms / 0.3 ms
General
Dielectric strength, input/output	2500 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.71 oz (30 g)

Technical document (PDF)  |  Request a quote for ED10C5 (reply within 24 hours)