DRA-CN024D05 Crydom - Relays

DRA-CN024D05 Description

Rated at 24 V and 3.5 A, the Crydom DRA-CN024D05 is a solid state relay. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the DRA-CN024D05, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom DRA-CN024D05 is used for control cabinet and PLC output interfacing, switching heaters, solenoids, valves, contactors and indicator loads in industrial automation and building control.

Key Specifications

Crydom DRA-CN024D05 is a 6.2 mm DIN-rail SSR assembly (DRACN Series), DC output 0-24 VDC, 3.5 A, normally open, control 3-12 VDC, yellow LED input indicator. Source: Crydom DRACN Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	0-24 VDC
Maximum load current @ 40°C	3.5 A
Minimum load current	1 mA
Maximum blocking voltage	30 VDC
Maximum surge current	9 A (10 ms)
Typical on-state voltage drop @ rated current	0.4 V
Maximum off-state leakage @ rated voltage	0.001 mA
Maximum PWM	500 Hz
Switch configuration	Normally open
Input
Control voltage range	3-12 VDC
Must turn-on / turn-off voltage	3.0 / 1.5 VDC
Nominal input impedance	500 Ohm
Typical input current	10 mA @ 5 VDC
Typical turn-on / turn-off time	120 µs / 100 µs
General
Dielectric strength, input/output	2.5 kV
Ambient operating temperature	-25 to 60°C
Weight (typical)	31 g

Technical document (PDF)  |  Request a quote for DRA-CN024D05 (reply within 24 hours)