DC60S7 Crydom - Relays

DC60S7 Description

The DC60S7 is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has sourced power semiconductors for maintenance teams and OEMs since 2001. For price and availability of the DC60S7, send us a request for quote. Please confirm the specifications against the manufacturer's datasheet before purchase.

Summary of Features

Target Applications

Crydom DC60S7 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom DC60S7 is a 7 A DC output panel-mount solid state relay (DC60 Series), bipolar transistor output, 3-48 VDC load, DC control 3.5-32 VDC, normally open. Source: Crydom DC60 Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Recommended operating voltage	3-48 VDC
Absolute maximum rating	60 VDC
Maximum load current	7 Adc
Minimum load current	20 mA
Maximum surge current (10 ms)	14 Adc
Maximum on-state voltage drop @ rated current	1.3 Vdc
Maximum off-state leakage @ rated voltage	0.1 mA
Thermal resistance junction to case (Rjc)	2 °C/W
Output type	Normally open
Input
Control voltage range	3.5-32 VDC
Minimum turn-on / must turn-off voltage	3.5 VDC / 1 VDC
Input current	2.2-25 mA
Maximum turn-on / turn-off time	0.1 ms / 0.3 ms
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	2.46 oz (70 g)

Technical document (PDF)  |  Request a quote for DC60S7 (reply within 24 hours)