CWD2410P Crydom - Relays

CWD2410P Description

The CWD2410P is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

We help engineers and repair technicians find parts like the CWD2410P, including obsolete ones. Send a quick RFQ for current pricing and delivery. Before ordering, please confirm ratings and pin-out with the official datasheet.

Summary of Features

Target Applications

Crydom CWD2410P is used for switching AC loads in industrial heating and temperature control (ovens, furnaces, plastic molding and extrusion machines), packaging and food processing equipment, lighting control, HVAC systems and industrial automation.

Key Specifications

Crydom CWD2410P is a 10 A panel-mount solid state relay, CW24 Series (24-280 VAC), SCR output, DC control, zero voltage turn-on, with LED status indicator and IP20 touch-safe cover, overvoltage protection. Source: Crydom CW24 Series datasheet (FDE-07-01 Rev. A). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-440 Hz)	24-280 Vrms
Maximum load current	10 Arms
Transient overvoltage	600 Vpk
Minimum load current	150 mArms
Maximum 1-cycle surge current (50/60 Hz)	380/400 Apk
Maximum on-state voltage drop @ rated current	1.3 Vpk
Maximum off-state leakage @ rated voltage	1 mArms
Minimum off-state dv/dt	500 V/µs
Maximum I²t for fusing, 1/2 cycle (50/60 Hz)	720/660 A²s
Thermal resistance junction to case (Rjc)	0.35 °C/W
Motor rating (UL 508 / IEC 60947)	0.5 HP @ 120 VAC, 1.5 HP @ 240 VAC
Switching type	zero voltage turn-on
Input
Control voltage range	3-32 VDC
Minimum turn-on voltage	3 VDC
Must turn-off voltage	1 VDC
Input current	10-15 mA
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	4000 Vrms
Ambient operating temperature	-40 to 80°C
LED input status indicator	Green
Weight (typical)	2.88 oz (81.53 g)

Technical document (PDF)  |  Request a quote for CWD2410P (reply within 24 hours)