CKM0610 Crydom - Relays

CKM0610 Description

The CKM0610 from Crydom is a solid state relay with a 60 V / 10 A rating. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent (Young & New Century LLC) supplies power modules, thyristors, diodes and other industrial components, including legacy parts. Contact us for a quote on the CKM0610, and please confirm ratings against the datasheet before ordering.

Summary of Features

Target Applications

Crydom CKM0610 is used for switching DC loads such as DC motors, solenoids, valves, heaters and LED lighting in industrial automation, battery-powered and solar systems, test equipment and transportation.

Key Specifications

Crydom CKM0610 is a 10 A slim DC solid state relay (CKM Series, 22.5 mm wide, DIN rail or panel mount), low-leakage MOSFET output 0-60 VDC, DC control 4-32 VDC, LED input indicator. Source: Crydom CKM Series datasheet (Rev. 090512). Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage	0-60 VDC
Maximum load current	10 Adc
Maximum surge current (10 ms)	30 Adc
Maximum on-state voltage drop @ rated current	0.2 VDC
Maximum on-state resistance (RDS-on)	0.02 Ohm
Maximum off-state leakage @ rated voltage	0.1 mA
Input
Control voltage range	4.0-32 VDC
Minimum turn-on / turn-off voltage	4.0 / 1.0 VDC
Maximum input current	9 mA @ 5 VDC, 11 mA @ 32 VDC
Maximum turn-on / turn-off time	1.0 ms / 1.0 ms
General
Dielectric strength, input/output/base	2500 Vrms
Ambient operating temperature	-40 to 80°C
Terminals	Box clamp
Weight (typical)	10 oz (280 g)

Technical document (PDF)  |  Request a quote for CKM0610 (reply within 24 hours)