CHTA12-600 Crydom - TRIAC

CHTA12-600 Description

The CHTA12-600 from Crydom is a solid state relay with a 600 V / 12 A rating. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has been supplying power semiconductors since 2001, including discontinued and hard-to-find part numbers. Send us an RFQ for the CHTA12-600 and we will reply with price, condition and lead time. Please check the manufacturer's datasheet to confirm ratings, package and pin-out before you order.

Summary of Features

Target Applications

Crydom CHTA12-600 is used for AC switching and phase control in heaters, lighting dimmers, motor speed control, appliances and solid state relays.

Key Specifications

Crydom CHTA12-600 is a 12 A, 600 V high-temperature (150°C junction) TRIAC in a TO-220AB isolated package. Source: Crydom CHTA/CHTB12 TRIAC datasheet. Values at 25°C unless noted.

Parameter	Value
RMS on-state current (full sine wave)	12 A (Tc = 120°C)
Repetitive peak off-state voltage (VDRM/VRRM)	600 V
Gate trigger current IGT (max, QI-II-III)	35 mA
Gate trigger voltage VGT (max)	1.3 V
Holding current IH (max)	35 mA
Critical rate of rise of off-state voltage dv/dt (min, Tj = 150°C)	300 V/µs
Non-repetitive surge peak on-state current	140 A (50 Hz) / 145 A (60 Hz)
I²t for fusing (10 ms)	112 A²s
On-state voltage VT (max)	1.5 V @ ITM = 17 A
Thermal resistance junction to case	2.3 °C/W
Isolation voltage	2500 Vrms
Operating junction temperature	-40 to 150°C
Package	TO-220AB isolated

Technical document (PDF)  |  Request a quote for CHTA12-600 (reply within 24 hours)