ASPF240D3 Crydom - Relays

ASPF240D3 Description

The ASPF240D3 is a solid state relay made by Crydom. It is widely used for heater control, motor switching, lighting and process equipment where mechanical contacts would wear out.

USComponent has sourced power semiconductors for maintenance teams and OEMs since 2001. For price and availability of the ASPF240D3, send us a request for quote. Please confirm the specifications against the manufacturer's datasheet before purchase.

Summary of Features

Target Applications

Crydom ASPF240D3 is used for PCB-level switching of small AC loads such as solenoids, valves, small heaters, fans and lamps in control boards, appliances, HVAC controls and industrial electronics.

Key Specifications

Crydom ASPF240D3 is a 3.0 A mini-SIP PCB-mount solid state relay (ASPF Series), SCR output 24-280 VAC, DC control 4-10 VDC, zero-crossing turn-on. Source: Crydom ASPF Series datasheet. Values at 25°C unless noted.

Parameter	Value
Output
Operating voltage (47-63 Hz)	24-280 Vrms
Maximum load current	3.0 Arms
Minimum load current	0.1 Arms
Transient overvoltage	600 Vpk
Maximum surge current (16.6 ms)	40 Apk
Maximum on-state voltage drop @ rated current	1.5 Vpk
Maximum off-state leakage @ rated voltage	0.1 mArms
Minimum off-state dv/dt	500 V/µs
Input
Control voltage range	4-10 VDC
Must turn-on / turn-off voltage	4.0 / 1.0 VDC
Typical input current @ 5 VDC	15 mA
Nominal input impedance	300 Ohm
Maximum turn-on / turn-off time	1/2 cycle / 1/2 cycle
General
Dielectric strength, input/output/base	3750 Vrms
Ambient operating temperature	-30 to 80°C
Weight (typical)	0.35 oz (10 g)

Technical document (PDF)  |  Request a quote for ASPF240D3 (reply within 24 hours)